Plumbing is an important but challenging aspect of home repair in NJ that is best left to professionals. With the potentially high costs associated with replacing your pipes and repiping, knowing when or not to repipe your home is critical. Bearing that in mind, here is a review of the top 9 signs that it is time to call in the repiping service.
New Jersey Plumbing Company Areas
9 Signs That You Should Call the Repiping Service
1. Pipes Are Making Noises
Water should pass through the pipes in your home without making any strange sounds. If you start hearing strange noises in your pipes, such as a knocking or banging type of sound, it is not a sign that you should ignore. It is usually an indication of ageing pipes in New Jersey. While this might start out as just a minor annoyance, loud noises will only become worse and become a complete nuisance if you fail to have them replaced.
2. Water Has an Unusual Smell or Odor
Chemical reactions happening inside corroded or rusted plumbing can create foul odors in the water. If you see a spurt of rust-colored water when your first turn on your faucet, it is another indication that your pipes are producing unhealthy byproducts into your water supply. If you see any of these indicators, you should contact a plumber immediately.
3. Discolored Water
The color of your water can tell you a lot of the condition of your pipes. Cloudy, brown, or yellowish water may come out of your faucets when you turn on the water for several reasons. If some work is being done on the water mains, dirty water will continue flowing until it is complete. If you find the discoloration only in hot water, you may be dealing with a malfunctioning water heater. However, if both the hot and cold water taps produce dirty water regularly and the water has a metallic taste, the problem is likely due to corrosion in the pipes.
4. Extreme Temperature Variations
Hot water lines usually deteriorate at a faster rate than the cold water lines. When the lines start deteriorating, corrosion debris is usually trapped and lodged within the anti-scalding devices built into shower and sink valves thus preventing the devices from working as designed. If the temperature either reacts wildly or is hard to change, your pipes may require replacement.
5. You Have Polybutylene Pipes
If you have polybutylene pipes in your home, it is advisable to have them replaced as quickly as possible. Polybutylene is a flexible and inexpensive plastic that was used from 1978 to 19995 for residential piping. Since it is quite vulnerable to rupturing, it is no longer accepted by the United States building codes. If you want to tell whether you have polybutylene pipes you can check whether they are white in color and include the letters “PB” in the printed label.
6. Your Home is Over 40 Years Old
If your home was built over 40 years ago, it is highly likely that the pipes have already started deteriorating. With the exception of PVC pipes, most pipes used in home construction have an average lifespan of about 30 years, although it depends on the level of maintenance and the type of pipes. Galvanized steel piping starts to show signs of failure in as little as 20 years, while brass and copper piping can last for over 50 years.
7. Visible Corrosion On Pipes
The lifespan of pipes will be of little importance if the signs of corrosion on the pipes are already visible. Fortunately, it is something you can check for yourself by looking at the condition of the pipes. The signs of corrosion include rust colored powder, blue-green tint on copper piping, dimpling, flaking, or discolorations of any kind. Corrosion almost always results in leaks if not fixed. If your pipes look like they are suffering from corrosion, it is time to replace them.
8. Frequent Leaks
Frequent leaks are by far the most obvious sign that your pipes require replacement. But how many leaks are too many? The truth is that there is no exact number, but if you experience more than 3 leaks in a period of 6 months, it is likely that your pipes are corroded and require replacement. Leaks can be easily detected through visible evidence although other signs of a leak include the development of mildew and mold, increased water bills, and poor water pressure.
9. Water Pressure issues
Low water pressure in your household plumbing can have multiple causes. If only the hot water dribbles, the problem is likely with the water heater. If only the showerhead or one faucet has a lame spray, cleaning the aerator or filter can solve the problem. If you are experiencing a systemic problem, check the pressure relieve valve where the water supply pipe enters the home to ensure it is not closed or broken. Finally, perform a home water meter leak test to rule out undetected leaks.
If the checks listed here fail to reveal a cause for the law water pressure, the problem could be arising from accumulated debris and rust within the pipes. Old galvanized pipes are especially prone to interior rust. Even old copper piping develops pinhole corrosion.
The Bottom Line
The majority of homeowners usually do repiping in stages, switching out all the accessible plumbing in the crawl spaces, basement, and attic and then switching out the rest of the plumbing in subsequent renovations. If you have noticed any of the 9 signs discussed here and believe that it is time for an upgrade, get in touch with an experience repiping service to look into your situation and offer advice on the best course of action.